When grain dries, the water leaves and the dry matter stays. Shrink is the weight that disappears on the way from harvest moisture to the moisture the grain is sold or stored at. It has two parts: water shrink, which you can calculate exactly, and handling loss, which you have to estimate.

Water shrink

Moisture is quoted on a wet basis: 20% moisture means 20% of the weight is water and 80% is dry matter. If the dry matter stays the same, the weight after drying is:

dry weight = wet weight × (100 − initial moisture) ÷ (100 − final moisture)

Per point of moisture removed, that's 100 ÷ (100 − final moisture) percent of the wet weight. The factor depends only on the final moisture (Purdue NCH-61):

Dry to13%13.5%14%14.5%15%15.5%
Water shrink per point1.149%1.156%1.163%1.170%1.176%1.183%

Purdue's example: 1,000 lb of 25% corn dried to 15.5% loses 9.5 × 1.183 = 11.24% in water.

Handling loss

Some dry matter is lost too: fines and broken kernels blown out or screened off, volatile compounds, and respiration. Iowa State research measured 0.22% to 1.71% on farms (0.82% average) and 0.64% to 1.33% at commercial dryers (0.88% average). Drying tables usually add a flat 0.5% of the wet weight. In Purdue's example, 11.24% + 0.5% = 11.74% total shrink, leaving 882.6 lb.

Pencil shrink

Many buyers skip the formula and multiply the points over base by a constant, such as 1.3% or 1.4%. Since the true water shrink is about 1.18% per point to 15.5%, the rest is a handling charge, and it grows with every point. See is your shrink factor fair?

Bushels

A "wet bushel" is just the wet weight divided by the standard weight (56 lb for corn). After shrink, divide the dry weight by the same standard weight. The shrink calculator does the arithmetic for every crop on this site.